Filter
Top Products
16_ Installing your dryer
installing your dryer
DOOR REVERSAL
1. Disconnect the power supply to the unit.
2. Remove the top screw on the top hinge. Loosen but do
not remove the lower screw on the top hinge. Repeat the
procedure for the lower hinge.
3. Lift the door and remove it from the dryer.
4. Remove 4 screws around the perimeter of the door.
5. Remove the door skin to expose the inner door panel.
6. Remove the internal door and hinge components and
reassemble them to the opposite side of the Inner Door
Panel.
7. Reattach the outer door skin to the Inner Door Panel.
8. Remove 4 screws around the perimeter of the door.
DV665JW-02369E_EN.indd 16 2007-05-15 ø¿»ƒ 3:05:47