Filter
Top Products
installing your dryer _21
DOOR REVERSAL
1. Unplug the power cord.
2. Remove the four hinge screws from the door
3. Remove the door by lifting it
4. Remove the two screws from the holder-lever and then remove
the cover-holder.
5. Assemble the holder-lever on the opposite side using the screws
that were removed from the holder-lever-in Step 4.
6. Assemble the cover-holder on the opposite side.
7. Remove the two cover-hinges.
8. Assemble the two cover-hinges
on the opposite side.
Use to remove cover-holder,
cover-hinge with (-) driver
9. Remove the 14 screws.
Two screw(L) is different other screws.
(longer than the other.)
01 installing your dryer
L
DV400-03170A_EN_HUDSON-PJT_v1.indd Sec3:21DV400-03170A_EN_HUDSON-PJT_v1.indd Sec3:21 2012-01-20 1:58:292012-01-20 1:58:29