Filter
Top Products
Control panel (DV4006)
1. TIME button
Initial time mode of TIME button displays 50 minutes. Push TIME button contin-
uously to change time as follows: 50 minutes
→
40 minutes
→
30 minutes
→
20
minutes
→
50 minutes
2. TEMPERATURE button
Initial mode is set to OFF at the factory. Push TEMPERATURE button to select
LOW temperature and turn the lamp ON.
3. PROGRAM button
Initial mode displays CUP BOARD. Push PROGRAM button each time to change
the mode as follows:
Cupboard
→
Iron
→
Rotary Iron
→
Extra
→
Cupboard
4. COURSE button
Initial mode displays COTTON. Push the button to change the mode as follows:
Cotton
→
Synthetics
→
Cotton
5. AIRING button
Initial mode of AIRING turns ON not only AIRING lamp but also 50 MINUTES
lamp at the same time. The system runs under NO HEATING mode. Then, push
TIME button to change time as follows:
50 minutes
→
40 minutes
→
30 minutes
→
20 minutes
→
50 minutes
6. SIGNAL button
At initial mode, completion buzzer sound is set to OFF at the factory. Push SIG-
NAL button to turn SIGNAL lamp ON and make completion buzzer sound.
7. FILTER lamp
Turn the system ON to let FILTER lamp flicker 3 times.
When a drying cycle is finished, FILTER lamp turns ON to display cleaning
instruction of filter.
8. START/PAUSE button
Press the button to start and pause the system.
9. POWER button
Press the button one time to turn the system ON, press it once more to turn the
system OFF. When the system turns ON for longer than 10 minutes without press-
ing any button, it automatically turns OFF.
Operating Instructions, Tips
7
SAMSUNG Clothes Dryers Owner’s Instructions