Filter
Top Products
22_ operating Instructions, tips
Cycle Selector
To select a cycle, rotate the Cycle Selector dial to the desired cycle.
The indicator light by the cycle name will illuminate. The Normal, Heavy Duty, Perm
Press and Delicates cycles are Sensor Dry cycles. Sensor Dry automatically senses the
moisture in the load and shuts the dryer off when the load reaches the dryness level
((more dry to damp dry) you selected.
Normal – Use this cycle to dry loads of cotton, underwear, and linen.
Heavy Duty – Use this cycle to dry heavy fabrics such as jeans, corduroys, or work
clothes with high temperature heat.
Perm Press – Dry wrinkle-free cottons, synthetic fabrics, knits, and permanent press
fabrics automatically.
Delicates – The Delicates cycle is designed to dry heat-sensitive items at a low drying
temperature.
Sanitize - Lets you sanitize garments by infusing high temperature heat deep into the
fabric during the drying cycle. Use this cycle to keep your bedding and curtains clean
through sanitization.
Time Dry – Time Dry allows you to select the desired cycle time in minutes. Turn the
Cycle Selector dial to Time Dry, and then press the Time Key arrow to set the drying
time.
Press the arrow repeatedly to scroll through the time settings.
Quick Dry – Provides a 30 minute drying cycle.
Refresh – This cycle is best for smoothing out wrinkles and reducing odors from loads
consisting of one to four dry items. In this cycle a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat.
Wrinkle Away – The Wrinkle Away cycle removes wrinkles from clothes stored in
closets, etc. It provides a wrinkle release via optimized steam care. You can change the
drying time.(Minimum time : 20 minutes) *For best results, load no more than 3 items.
Digital Graphic
Display
The display window shows the estimated time remaining in the cycle after you have
pressed the Start/Pause button. The estimated time remaining may fluctuate as the
cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete. When your dryer is
in the cool-down phase, the Cooling light will illuminate. When your dryer is in the wrinkle
prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, “END” appears in the display panel until you open the dryer
door, press the Power, Close, or Start button, or 5 minutes have passed.
If your dryer is paused during a cycle, the indicator lights will blink until the Start/Pause
button is pressed.
operating Instructions, tips
OVERVIEW OF THE CONTROL PANEL
1
6
5
2 4
73 8
9
1
2
DV365-03064C_EN.indd Sec5:22DV365-03064C_EN.indd Sec5:22 2012-06-07 7:54:482012-06-07 7:54:48