Filter
Top Products
- 9 -
MANUAL FUNCTIONS
Each washing course changes manually.
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash -
Start/Hold button
Blanket course includes SOAK Function basically.
INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
■ ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration
occurs. (Allowable is 1°)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly
exposed to rain. Moisture may destroy the electrical insulation causing an
electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the
washer near furnaces, boilers, etc. Do not place under direct sunlight.
■ LEVELLING
• If the washer is not leveled with the ground, it makes the machine tremble
more or be out of order. So, make sure that the washer is leveled properly.
once
WASH+ FUNCTION
(If you want to add more wash-time, use to this wash+ function)
Press the POWER button.
Select the course(Press the course button).
➜ BLANKET, ECO+, SPEEDY, WOOL
Press the FUNCTION button once.
Press the START/HOLD button once.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
twice
SOAK & WASH+ FUNCTION
Press the POWER button.
Select the course(Press the course button).
➜ BLANKET, ECO+, SPEEDY, WOOL
Press the FUNCTION button twice.
Press the START/HOLD button once.
Water level is selected automatically.
Soaking, Washing, rinsing, and spinning follow.
three times
SOAK FUNCTION
Press the POWER button.
Select the course(Press the course button).
➜ BLANKET, ECO+, SPEEDY, WOOL
Press the FUNCTION button three times.
Press the START/HOLD button once.
Water level is selected automatically.
Soaking, Washing, rinsing, and spinning follow.
WASH ONLY
Press the POWER button.
Press the FUNCTION SELECT button four times.
Press the START/HOLD button once.
When the FUNCTION button is pressed during washing, the wash
time can be changed to between 3 and 25 minutes in duration.
RINSE ONLY
Press the FUNCTION button five times.
Press the START/HOLD button once.
When the FUNCTION button is pressed during rinsing, the rinse
times can be changed to between 1 to 5 times in duration.
SPIN ONLY
Press the FUNCTION button six times.
Press the START/HOLD button once.
When the FUNCTION button is pressed during spinning, the spin
time can be changed to from 1 to 7 minutes.
WASH AND RINSE
Press the FUNCTION button seven times.
Press the START/HOLD button once.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 to 5 times in duration.
RINSE AND SPIN
Press the FUNCTION button eight times.
Press the START/HOLD button once.
Rinsing and spin drying follow.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 and 5 times in duration.
four times
five times
six times
seven times
eight times
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour
water into the tub up to the level just
below the pulsator, and adjust the legs
so that the pulsator is positioned at the
center of the water as shown in the
figure.
• Place the machine more than 10cm away from the wall.
• Adjust the legs on feet