Russell Hobbs RHWM81400DIDB Washer User Manual


 
Installation
7
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at
www.productcareuk.com
4. Adjust the level of washing machine by the adjustable feet. Please check if there is a gap
between the four adjustable feet and the floor. If there is then adjust the level of the
washing machine by turning the adjustable feet. Make sure that the machine does not
sway and that it is completely level. After the adjustment is finished, turn the fixing nuts
up tightly, so that the adjustment that has been made is fixed.
NOTE
There should be no swaying of machine and all the adjustable feet should sit/touch the
floor.
Location of the Washing Machine
• Check location where the washer will be installed. Make sure you have everything
necessary for correct installation.
Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Do not place or store laundry products on top of washer at any times.
• Install the washer on the horizontal solid floor. If the washer is installed on an unsuitable
floor, it could make considerable noise, vibrate severely and cause a malfunction. If the
washer is not level, adjust leg up or down for horizontal installation.
• Ventilation openings must not be obstructed by carpeting when the washer is installed
on a carpeted floor.
• Leave some space (right & left : 2cm, rear : 10cm).
• In case of built-in installation, the distance between top of the washer and bottom of
upper plate should be at least 3mm.