Russell Hobbs RH1247W Washer User Manual


 
Do not install your machine on a carpet or suchlike grounds.
For your machine to work silently and without any vibration, it
should it be settled on a flat, non-slippery and tough ground.
Loosen the plastic adjustment nut.
Adjust the stays upward and downward by rotating them.
When the correct balance has been achieved, tighten the plastic
adjustment nut again by rotating it upwards.
Never put cardboard, wood or suchlike materials under your
machine to try and stabilize the distortions of the ground.
7
SECTION-2: INSTALLATION
ADJUSTIMENT OF FEET