Russell Hobbs RH1247W Washer User Manual


 
All repairing operations required for your machine should be carried
out by our authorised service. If your machine requires a repair or if
you cannot remove the fault by the help of the information provided as
follows:
Unplug your machine.
Turn the water faucet off.
Contact the nearest authorised service.
FAULT
POSSIBLE CAUSE
REMOVING
METHODS
Your machine does
not start.
It is not plugged in.
Plug it in.
Fuses out of order.
Replace the fuses.
Electricity cut-off.
Check mains power.
Start/pause button
not pressed.
Press on start/pause
button.
Programme knob on
position 0.
Switch the
programme knob to
the desired position.
The machine door is
not completely
closed.
Close the machine
door.
Your machine does
not intake water.
Your faucet is turned
off.
Turn your faucet on.
Water inlet hose may
be twisted.
Check water inlet
hose.
Water inlet hose
clogged.
Clean water inlet
hose filters. (*)
Valve inlet filter
clogged.
Clean the valve inlet
filters. (*)
The machine door is
not completely
closed.
Close the machine
door.
(*) See the chapter regarding maintenance and cleaning of your
machine.
42
SECTION 10: TROUBLESHOOTING