Filter
Top Products
FAULT
POSSIBLE CAUSE
REMOVING
METHODS
Excessive foam is
formed in the
detergent drawer.
Excessive amount of
detergent used.
Press on Start/Pause
button. To eliminate
foam formation, mix a
spoon of softener with
half litre of water, and
pour the mixture in
the detergent drawer.
After 5-10 minutes,
press on Start/Pause
button again. For next
washing operation,
decide the dose of
detergent as required.
Wrong detergent
used.
Use detergents
produced only for
automatic washing
machines in your
machine.
Unsatisfactory
washing result.
The dirtiness of your
laundry does not
match the programme
you have chosen.
Select the programme
appropriate for correct
dirtiness of your
laundry. (see
programme table)
Amount of detergent
used insufficient.
Adjust the amount of
detergent based on
the dirt level of your
laundry.
Laundry in excess of
maximum capacity
put in your machine.
Load your machine
with laundry, amount
of which shouldl not
exceed maximum
laundry capacity
44
SECTION 10: TROUBLESHOOTING