Russell Hobbs RH1247S Washer User Manual


 
Unplug your machine.
Turn the water faucet off.
Filters to avoid dirt and foreign substances in the water from
penetrating into the machine are available both on the side of faucet
and on the ends of water valves along the water inlet hose of your
machine. If your machine cannot intake sufficient amount of water
despite water faucet being open, these filters should be cleaned.
Detach the water inlet hoses.
Remove the filters on water inlet valves using pliers and then clean
it with a brush in water.
Disassemble the filters on the side of faucet side of water inlet
hoses manually and clean it.
Having the filters cleaned, you can fit them in the same way
reversely.
CAUTION: Filters of water inlet valves may be clogged due to
contaminated water faucet or lack of necessary maintenance or
valves may be broken down, causing water leaking into your machine
continuously. Breakdowns that may arise because of these
reasons are out of scope of warranty.
35
SECTION 8: MAINTENANCE AND CLEANING OF YOUR
MACHINE
WATER INLET FILTERS