Filter
Top Products
Set the temperature control dial according
to the type of fabric you are ironing. Check
the fabric’s label for appropiate setting.
᭹ Synthetics (low temperature)
᭹᭹ Silk/wool (medium temperature)
᭹᭹᭹ Cotton/linen (high temperature)
Please read the instructions for use and the Important Safeguards
carefully.
Slowly peel the protective cover off the soleplate.
It is normal for a small amount of smoke to be produced the first
time the iron is used. This will quickly disappear.
BEFORE USE
Filling with water:
Made in Germany
M
a
d
e
in
G
e
rm
a
n
y
5
DE 873 Professional USA
3-WAY AUTO-OFF (NOT ON ALL MODELS)
If the iron is not moved while it is
switched on, an internal safety switch
will turn it off. It will turn off in 8 minutes
if left vertically or in 30 seconds if left on
its soleplate or tipped over.
A red flashing light indicates that the
auto-off has been activated. To switch the
iron on again, move the iron or gently
shake it.
Wait until iron is fully reheated before use.
STEAM IRONING
Ensure the iron is unplugged.
Slide the variable steam control
completely to the left.
Hold the appliance upright so that the
water filling inlet is horizontal.
Fill the iron with tap water to the
maximum level mark (see water usage
for more informations).
Adding water:
If you need to add water during ironing,
unplug the iron and repeat above steps.
Ensure iron is fully reheated after filling
(temperature indicator light goes out)
before ironing.
SELECTING THE TEMPERATURE
To avoid damage to clothes from dust or dirt that may collect in the
iron, we recommend that for the first use or after the iron has been
stored for some time that you first iron an old cloth, testing both the
steam and burst of steam feature.