Rowenta DG 580 Iron User Manual


 
DG580
The DG580 allows steam output to be adjusted.
setting on the iron : the steam control dial should be
set to min.
● ● setting on the iron : the steam control should be set a
the mid level
● ● ● setting on the iron : the steam control dial can be set
to the max.
Note: It is normal for the connection cord to become warm
during use.
DRY IRONING
This appliance can be used for dry ironing if the steam button
is not pressed.
˾
DG 560: Set the temperature control dial on the iron for
the type of material being ironed.
˾
DG 580: Set the iron’s on/off switch to the on position.
Do not turn on the steam switch.
VERTICAL STEAM
˾
To remove wrinkles in cotton or
linen, the soleplate can come in
contact with the fabric for
optimal results.
˾
For synthetic fabrics, a distance of
4 inches is recommend to avoid
damage to the garment.
˾
For delicate fabrics, we
recommend carrying out a test on
an unobtrusive part of the
garment (inner seam).
Caution:
Steam produced is very hot. To avoid burns and scalding
never iron or steam clothes while they are being worn.
1. Fill iron according to the Filling the Boiler section of
instructions.
2. DG 560 model: Press the on/off switch (A) on the control
panel and the steam indicator light will turn on. Set the
temperature control dial on the iron to the (
● ● ●) setting.
Type of fabric Iron thermostat Steam control
setting dial setting
Synthetic
Viscose
Polyester
(low temperature)
Silk
Wool
● ●(medium temperature)
Cotton
Linen
● ● ● (high temperatures)