Roper GL5030V Clothes Dryer User Manual


 
Using your dryer
A. Loading your dryer
(Cycles and temperature suggestions vary by model. See your console and Pages 4-7 for
specific model information.)
Sort Load
Suggested Cycle
Suggested Temperature
--
Cottons and Linens
Auto-Sense Heavy (For Model 6050 temperature
Extra Heavy- Bedspreads, mattress pads, quilts, etc.
(Models 6050/5030) settings, see Page 7)
Heavyweight
- Towels, jeans, corduroys, work clothes
Cotton/Perm Press-High
Mediumweight - Sheets, pillowcases, dresses, shirts, diapers
(Model 5030)
Lightweight - Batistes, organdies, lingerie
Special Dry (Model 4030) Normal (Model 4030)
Permanent Press, Synthetics and Blends
Heavyweight - Work clothes,
jackets, raincoats, etc.
Mediumweight - Shirts, play clothes, sheets,
slacks
LightweIght - Lingerie, blouses, dresses
Auto-Sense Permanent Press
(Models 6050/5030)
Permanent Press (Model 4030)
(See Page 4 for time settings)
(For Model 6050 temperature
settings, see Page 7)
Cotton/Perm Press-High
(Model 5030)
Normal (Model 4030)
Knits
Heavyweight - cottons, rayons, blends, T-shirts, slacks,
shirts, etc.
Auto-Sense Permanent Press
(Models 6050/5030)
Permanent Press (Model 4030)
40-50 minutes
Medium-Low (Model 6050)
Cotton/Penn Press-High
(Model 5030)
Normal (Model 4030)
Medium
and Lightweight
- Synthetics (polyester, acrylic,
etc.) and blends, lingerie, blouses, dresses, etc.
Auto-Sense Permanent Press
(Models 6050/5030)
Permanent Press (Model 4030)
30-40 minutes
Knits/Delicate Low (Model 6050)
Knits Low (Model 5030)
Knits Low (Model 4030)
Delicate
Fabrics
Sheer curtains (2 or 3 panels)
Gauze, lace, etc.
Auto-Sense Permanent Press
(Models 6050/5030)
Permanent Press (Model 4030)
20-30 minutes
15-20 minutes
Ex Low (Model 6050)
Knits Low (Model 5030)
No Heat/Fluff (Model 4030)
Rubber, Plastic, Heat-sensitive Fabrics Timed settings
No HeatIFluff (Model 6050)
(For Model 6050, see No Heat/Fluff.
Foam Rubber
- Pillows. bras, stuffed toys
20-30 minutes
Page 6)
Plastic - Shower curtains, tablecloths
20-30 minutes
Timed Dry (Model 5030) No Heat/Fluff (Model 5030/4030)
Rubber-backed rugs
40-50 minutes
Permanent Press (Model 4030)
Olefin, polypropylene, sheer nylon 15-20 minutes
Do Not overdry. Overdrying can
cause shrinkage, static cling or
can damage some fabrics.
NOTE: The drawings in this book may
vary slightly from your dryer model.
They are designed to show the different
features of all the models covered by this
book. Your model may not include all the
features shown.
B.. Select a cycle and time
Turn
cycle control knob either direction
until
the indicator on knob’s outer ring
points
to cycle and setting you want.
C. Select temperature
E. To stop the dryer at any
Turn temperature selector to the
temperature setting you want.
D. To start
Iv
Open the door or turn the cycle control
knob to OFF. To restart, close the door,
select cycle (if necessary) and push
start button.
F. To change setting at any
time
Turn cycle control knob and/or
temperature selector to new setting.
The cycle control knob should point
to OFF when the dryer is not in use.
If the dryer is stopped before the
cycle finishes, turn the cycle control
knob to OFF.
Page 3