Philips HI 42 Iron User Manual


 
6
If you do not know what kind(s) of fabric(s) the article has been made
of, find a spot which will be invisible when wearing or using the article.
Try out the ironing temperature which is most suitable there. Start at a
relatively low temperature.
Pure woollen fabrics (100% wool) may be pressed with the iron set to a
steam position. Preferably set the steam control (B) to maximum
position. Use a dry pressing cloth.
When steam-ironing woollen fabrics, shining of the fabric may occur.
This can be prevented by turning the article inside out and ironing the
reverse side.
Velvet and other fabrics which rapidly acquire shiny spots should be
ironed in one direction only (with the nap) applying light pressure.
Always keep the appliance moving while ironing.
Iron the reverse side of synthetic materials and silk to prevent shining
spots. Do not use the spray to prevent stains.
Filling with water (for steam-ironing and spraying)
- Remove the mains plug from the wall socket before filling (or emptying)
the iron with water. Set the steam control (B) to position O (= no steam)
(fig. 2).
- Fill the filling cup (M) with water (max. 200 ml). Hold the iron in a tilted
position and pour the water into the filling aperture (fig. 3) to the
maximum level.
Fill the iron with normal tap water when using it for the first time.
For refilling, you can also use tap water. However, if the water is very
hard, it is advisable to use distilled water.
Do not put vinegar, starch, chemically descaled water or
descaling agents in the water reservoir!