Filter
Top Products
9
Before You Begin Cleaning
1. Unlock the clamp and slide
it up the tube assembly.
2. Remove the water tank.
3. Remove the cap on the
water tank.
4. Fill the water tank 3/4 full. Do
not overll the water tank.
WARNING!
!
Do not plug the steam cleaner into an electrical outlet
during assembly.
NOTICE
• Always turn the steam switch knob to the closed position
before installing a lled water tank.
• Do not leave the steam cleaner in one spot on any surface
for an extended period of time with a damp or wet cleaning
pad attached. This may damage the oor surface.
• The steam cleaner should only be used on tiles, linoleum, or
sealed wood ooring. Do not use on laminate ooring*.
• Always use the cleaning pad when cleaning hard oors.
Ensure cleaning pad is in place and properly attached to the
oor head.
• The force and heat of the steam may have an adverse effect
on some materials. Always test the steamer on a small
concealed area to determine if it is suitable for treatment.
9
Use
Steam Cleaning Hard Floors and Refreshing Carpets
To reduce the risk of personal injury, unplug cord
from electrical outlet and let the unit/accessories cool
down completely before handling.
ll line
*Steam 50 is practical for any surface with the
exception of those surfaces that are extremely
heat sensitive. We recommend NOT using it on ne
silks, delicate materials such as velour, some very
thin plastics, unsealed hardwood, ceilings, drywall,
and exterior paint of automobiles, electronics or
items using electricty. If ever in doubt, test a small
area before beginning extensive cleaning.