Morphy Richards RN40630 MUK REV2 Iron User Manual


 
7
MAINTENANCE
IMPORTANT: Do not descale
the soleplate with descaling
products, proprietary cleaning
agents or vinegar when
flushing out the soleplate.
To clean a ceramic
coated soleplate
(certain models only)
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the
3-dot position and pass it over a
clean piece of cotton which will
draw the deposit off the surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean a stainless
steel soleplate
(certain models only)
To keep the soleplate of your iron
clean and free of limescale, we
recommend that you use one of
the gentle chrome, silver or
stainless steel cleaners that are
generally available. Always follow
the manufacturer’s instructions.
To clean off melted man-made
fibres, set the iron at the 3 dot
position and pass it over a clean
piece of cotton which will draw
the deposit off the surface.
To clean a non-stick
coated soleplate
(certain models only)
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the 3 dot
position and pass it over a clean
piece of cotton. This will draw the
deposit off the surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean the exterior
Allow the iron to cool and wipe
over with a damp cloth and mild
detergent, then wipe with a dry
cloth.
EMPTYING AND
STORING
When you have finished ironing,
unplug your iron. Ensure that the
variable steam control is set at
the ‘
O
’ position E, lift up the
filler cap and empty any
remaining water out of the filling
hole H. Do not store in the box,
but in an upright position, so
that any drops of water
remaining cannot leak out and
discolour the soleplate.
IMPORTANT: The flex can be
damaged if wound too tightly
around the iron after use. Make
a loose loop with the flex and
wrap it around the iron. The iron
must be cool before winding the
flex and storing on its heel I.
Use the plastic clip provided to
secure the cable to the iron.
HELPLINE
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
resolve any issues than the
store from where you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly:
Name of the product.
Model number as shown on
underside of the appliance.
Serial number as shown on
underside of the appliance.
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
WEBSITE
You may also contact us through
our website, or visit the site to
browse and purchase appliances,
spare parts and accessories from
the extensive Morphy Richards
range.
H
I
For details of other Morphy Richards products, please see our website:
RN40630 MUK Rev2_Instruction Book 15/09/2010 15:59 Page 7