Filter
Top Products
Water Spray
D
Press the water spray button ¤
and aim the spray of water at
stubborn creases. You can do
this whilst dry ironing providing
there is water in the tank. When
using the water spray it may be
necessary to push the button a
few times to get the spray pump
primed.
Variable steam
E
Fill the iron with water as
described in ‘Filling’, page
5, and insert the plug into
the electrical socket.
The steam output can be varied
from low to high by moving the
variable steam control. When
using the iron at the bottom of
the steam range, the steam
output should be adjusted to
the low setting.
The steam facility should only
be used on garments which are
suitable for ironing at 3-dot and
MAX settings.
Steam boost
F
Press the steam boost
button ⁄ to obtain a boost
of extra steam for ironing
out creases in heavy
material such as denim etc.
The shot of steam can be used
whilst dry ironing, providing
there is water in the tank, and
the temperature control is set
within the steam range.
Do not use shot of steam at
temperatures below the steam
range shown on the control dial.
Note: For optimum steam
quality, do not operate the shot
more than three times in
succession.
Vertical steam
Hold the iron in a vertical
position between 1cm and 2cm
away from the item G. Press
the steam boost button ⁄, this
will create vertical steam.
This feature is especially useful
for removing creases from
hanging clothes, curtains, wall
hangings, etc.
Note; For optimum steam
quality, do not operate the shot
more than three times in
succession.
No drip system
(certain models only)
The no drip system is designed
to prevent water escaping from
the soleplate fl when the iron is
too cold.
During use, this feature may
emit a loud click, particularly
during heat-up or whilst cooling
down. This is perfectly normal
and indicates that the system is
functioning correctly.
Auto shut-off
(certain models only)
If your iron is fitted with the auto
shut-off function, it will
automatically shut down after a
set period.
If the iron is left unattended in
the horizontal position, it will
shut down after 1 minute.
If it is left in the vertical position,
it will shut down after 8 minutes.
The auto shut-off light  will
flash, indicating the product is in
shut-down mode, and will be
accompanied by an intermittent
beep sound.
To reactivate the iron, gently
shake it, the temperature
indicator light will come on,
indicating the iron is warming
up. Wait for the iron to heat-up
as normal.
Anti-scale system
(certain models only)
The life long anti-scale system
reduces scale deposits and
helps prolong the life of the iron.
6
F
UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119
G
⁄
E
Off / No steam
High steam setting
D
¤
RN40630 MUK Rev2_Instruction Book 15/09/2010 15:59 Page 6