Morphy Richards ELITE PRO Iron User Manual


 
Replacing anti-
scale medium
DD
1 When the indicator light
ÂÂ
flashes, you need to replace the
anti-scale cartridge
ËË
.
2 The steam generator needs to
be connected to the mains
supply.
3 Remove the tank from the base
unit.
4 Remove the anti-scale cartridge
which is situated behind the
tank, and replace the cartridge,
making sure the replacement
unit is pushed firmly in position.
5 Re-position the tank.
6 If the cartridge is not fitted
correctly, the unit will not
function. The ‘calc’ light
ÂÂ
will
flash, accompanied by a beep
sound.
Re-fit the cartridge and the unit
will operate as intended.
Note: A cartridge should filter
40 litres of hard water.
Replacement
anti-scale refills
To obtain replacement anti-
scale refills, telephone our
spares number on: 0844 873
0719.
If a new re-fill is not available,
you may continue operating the
appliance, but scale will build
up in the system. Replace the
anti-scale refill as soon as
possible.
Part Number 01030.
FEATURES OF
YOUR STEAM
GENERATOR
Steam function
During the steaming process,
small amounts of water may be
ejected from the soleplate. This
is normal and can be avoided
by using the steam for short
amounts of time and only when
the iron is at the correct
temperature (the indicator light
on the iron goes out when
ready).
Sudden jolts of the boiler unit
can also cause water droplets
on the soleplate; therefore, do
not move the base unit during
ironing. We recommend for the
first time ironing that you iron
over an old towel.
Vertical steam
Hold the iron in a vertical
position between 1cm and 2cm
away from the item
EE
. Press
the steam trigger
, this will
create vertical steam. This
feature is especially useful for
removing creases from hanging
clothes, curtains, wall hangings.
MAINTENANCE
To clean a stainless steel
soleplate
To keep the soleplate of your
iron clean and free of limescale,
we recommend that you use
one of the gentle chrome, silver
or stainless steel cleaners that
are generally available. Always
follow the manufacturer’s
instructions. To clean off melted
man-made fibres, set the iron
at 3-dot position and pass it
over a clean piece of cotton
which will draw the deposit off
the surface.
To clean a coated soleplate
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the
3- dot position and pass it over
a clean piece of cotton, this will
draw the deposit off the
surface.
Do not use scouring powder or
solution, as this could cause
damage to the coating.
To clean the
exterior
Allow the steam generator to
cool and wipe over with a
damp cloth and mild detergent,
then wipe with a dry cloth.
HELPLINE
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly.
Name of the product
Model number as shown on the
underside of the appliance.
Serial number as shown on
underside of the appliance.
UK Helpline
0844 871 0953
Replacement Parts
0844 873 0719
Ireland Helpline
1800 409 119
9
99
EE
DD
Cartridge
Drawer
42288 rev4 14/3/08 11:14 Page 9