Morphy Richards 40692 Iron User Manual


 
66
Vertical steam
FF
Hold the iron in a vertical
position between 1cm and 2cm
away from the item
FF
. Press the
shot of steam button
, this will
create vertical steam. This
feature is especially useful for
removing creases from hanging
clothes, curtains, wall hangings,
etc.
Note; For optimum steam
quality, do not operate the shot
more than three times in
succession.
No drip system
Your iron is fitted with a no drip
system which is designed to
prevent water escaping from the
soleplate when the iron is too
cold.
During use, the no drip system
may emit a loud click,
particularly during heat-up or
whilst cooling down. This is
perfectly normal and indicates
that the system is functioning
correctly.
Auto shut-off
Your iron is fitted with the auto
shut-off function, it will
automatically shut down after a
set period. The ‘safety switch
off’ LED will flash on the
function panel.
If the iron is left unattended in
the horizontal position, it will
shut down after 1 minute.
If it is left in the vertical position,
it will shut down after 8 minutes.
To reactivate the iron, gently
shake it and wait for the iron to
heat-up as normal.
Life long anti-scale
system
The life long anti-scale system
reduces scale deposits and
helps prolong the life of the iron.
MAINTENANCE
Self cleaning
GG
Your iron has a built in cleaning
system designed to keep the
water valve, steam chamber and
steam vents clear of lint and
loose mineral deposits.
1 Half fill the iron with water.
2 Place the iron on it’s heel.
3 Connect to a mains supply
outlet.
4 Set the temperature control to
‘MAX’. See ‘Temperature
control’ on page 5.
5 The indicator LED will flash until
the required temperature is
reached.
6 The indicator LED remains ‘on’
when the selected temperature
is attained.
7 Disconnect the iron from the
mains supply outlet.
8 Hold the iron horizontally over a
sink.
9 Press and hold down the
Self-clean button
GG
.
10 Steam and boiling hot water will
drain from the holes in the
soleplate, washing away the
scale and minerals that have
built up inside the Steam
Chamber.
11 Gently move the iron back and
forth until the water tank is
empty.
12 When cleaning is complete,
release the Self-clean button
.
13 Rest your steam iron back on
it’s heel and allow to fully cool
down.
14 Wipe the soleplate with a cold,
damp cloth.
After this cleaning operation,
empty out any remaining water.
GG
FF
UUKK HHeellpplliinnee 00884444 887711 00995533 RReeppllaacceemmeenntt PPaarrttss 00884444 887733 00771199 IIrreellaanndd HHeellpplliinnee 11880000 440099 111199
40692 rev2 20/6/08 14:32 Page 6