Filter
Top Products
77
MAINTENANCE
Emptying and storing
When you have finished ironing,
unplug your iron. Ensure that the
variable steam control is set at
the ‘0’ position, lift up the fill cap
and empty any remaining water
out of the filling hole
GG
.
Do not store in the box, but in
an upright position
HH
, so that
any drops of water remaining
cannot leak out and discolour
the soleplate.
IMPORTANT: The flex can be
damaged if wound too tightly
around the iron after use. Make
a loose loop with the flex and
wrap it around the iron. The iron
must be cool before winding the
flex and storing on it’s heel.
Jet cleaning
Your iron has a built in cleaning
system designed to keep the
water valve, steam chamber and
steam vents clear of lint and
loose mineral deposits. The ‘jet
clean’ should be operated after
each period of ironing.
To operate, ensure that there is
little water in the tank, place the
iron on it’s heel and turn the
temperature control dial to the
maximum setting. Wait for the
beep, then unplug the iron and
hold it about 6’’ (150mm) above
the sink in the ironing position.
Press the shot of steam button
about 10 times in succession.
After this cleaning operation,
empty out any remaining water.
WWAARRNNIINNGG:: DDoo nnoott aatttteemmpptt ttoo
ddeessccaallee tthhee ssoolleeppllaattee wwiitthh
ddeessccaalliinngg pprroodduuccttss..
To clean a coated
soleplate
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the 3
dot position and pass it over a
clean piece of cotton which will
draw the deposit off the surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean the exterior
Allow the iron to cool and wipe
over with a damp cloth and mild
detergent, then wipe with a dry
cloth.
Helpline
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly:
• Name of the product.
• Model number as shown on the
underside of the appliance.
• Serial number as shown on
underside of the appliance.
UK Helpline 0844 871 0953
Replacement Parts 0844 873 0719
Ireland Helpline 1800 409 119
GG
HH
40652 rev1 23/4/08 17:52 Page 7