Filter
Top Products
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
WWAARRNNIINNGG :: TThhee pplluugg rreemmoovveedd
ffrroomm tthhee mmaaiinnss lleeaadd,, iiff
sseevveerreedd,, mmuusstt bbee ddeessttrrooyyeedd,,
aass aa pplluugg wwiitthh aa bbaarreedd fflleexxiibbllee
ccoorrdd iiss hhaazzaarrddoouuss iiff eennggaaggeedd
iinnttoo aa lliivvee ssoocckkeett oouuttlleett..
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WWAARRNNIINNGG:: TThhiiss aapppplliiaannccee
mmuusstt bbee eeaarrtthheedd..
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank Dry and spray
Steam/spray/shot of steam
Without water in tank Dry ironing
INSTRUCTIONS FOR USE
33
Temperature guide
Jet clean
40652 rev1 23/4/08 17:52 Page 3