Filter
Top Products
Programme . . .
. . . interruption
^
Press the I-ON/0-OFF button.
^
To continue with the same
programme press the I-ON/0-OFF
button again.
. . . alteration
The machine will accept the following
changes after the START button has
been pressed,
– selection of a different temperature,
extra selection or de-selection of the
Water plus
option can be carried out
up to 6 minutes after start.
– the spin speed for final spin can be
changed if the programme permits.
After start it is no longer possible to se-
lect a different programme.
If a different programme or 6 minutes
after start another temperature is se-
lected the indicator light
Anti-crease/Finish
flashes. This does
not affect the programme sequence.
The indicator light goes out when the
programme selector is set back to the
programme or temperature previously
chosen.
To select a different programme pro
-
ceed as follows:
^
With the I-ON/0-OFF button switch off
the appliance.
^
Turn the programme selector to
Fin
-
ish
.
^
Switch the machine on with the
I-ON/0-OFF button.
^
Select a new programme.
^
Press the START button.
. . . Skipping a programme stage
^ Turn the programme selector to
Fin-
ish
.
As soon as the programme sequence
light for the stage at which the
programme should continue starts
flashing:
^ Turn the programme selector switch
to the appropriate programme within
4 seconds.
When programme locking has been
activated the programme cannot be
changed nor can a programme
stage be repeated or left out.
How to wash correctly
18