Filter
Top Products
Levelling the machine
The machine must be perfectly level to
ensure safe and proper operation.
Incorrect installation may increase
water and electricity consumption.
The screw feet can be adjusted to level
the machine:
Unscrew the foot or feet until the ma-
chine stands level.
Hold the foot tight using a pipe
wrench.
Tighten the counternut using a
screwdriver as indicated.
This machine is not intended for in-
tegrated installation or installation
under a continuous worktop. The
UBW building under kit cannot be
used with sloping facia
machines.
Building under
However, the machine,
- complete with its own lid which
must not be removed, -
can still be slid under a worktop, if
there is enough space.
The machine must be allowed to jut out
sufficiently for the control panel not to
be obscured.
Washer-Dryer stack
A Miele tumble dryer can be stacked
with this washing machine. A stacking
kit* is necessary.
All parts marked * are available from
the Miele Spare parts or Sales Depart-
ment, and from some Miele Dealers.
Installation
37