Filter
Top Products
Option 2:
^
Drill the numbered holes and the
screw points for the inner door panel
to the specified depth.
On chipboard fronts: inject silicone
sealant (supplied) into the (Ø 10 mm)
free holes.
Note that some of the holes required for
left or right hand hingeing will be
different.
Left hand hingeing:
left drawing (see template), holes 1, 2,
3, 4, 5, 7, 8
Right hand hingeing
right drawing (see template), holes 1, 2,
4, 5, 6, 7, 8
^
Unscrew the lower screw on the
upper hinge on both the left and right
hand sides of the door (see
illustration).
^ Using the screws provided, screw the
front panel through drill holes 1 and 2
on the inner door panel (see
template) - do not overtighten!)
^ Align the front panel.
^ Tighten the screws again.
^
Drill any more holes required through
the drill holes in the inner door panel.
^
Secure the front panel with the
remaining screws and hinge screws
provided.
Installation and connection
55