Miele W 3740 Washer/Dryer User Manual


 
,
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^
Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
,
The washing machine must not
be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
Installation and connection
46