Filter
Top Products
Adding or removing laundry
after a programme has started
^
Press the
Door
button to open the
drum door.
^
Add or remove items.
^
Close the drum door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
The door cannot be opened, if:
–
the suds temperature is above 55°C.
–
the water is above a certain level.
–
the programme has reached the
Final spin
stage.
If you press the
Door
button when the
above conditions are present, the
following will appear in the display:
i Door locked
Safety lock
The safety lock prevents the machine
from being opened, the programme
from being cancelled or the machine
from being switched off during a
wash programme.
To activate the safety lock
^
Press and hold in the
Start/Stop
button after the programme has
started.
Stop or in 3 secs X
^ Keep the
Start/Stop
button pressed in
until the time has elapsed and the
following appears in the display:
Locked X
The safety lock is now activated. It is
deactivated automatically at the end of
the programme.
To deactivate the safety lock
^
Press and hold in the
Start/Stop
button after the programme has
started.
Unlock in 3 secs X
^
Keep the
Start/Stop
button pressed in
until the time has elapsed and the
following appears in the display:
Unlocked W
Changing the programme sequence
28