Filter
Top Products
Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. In some
programmes, an additional rinse is
introduced if a spin speed of less than
700 rpm is selected.
To omit the final spin (Rinse hold)
The laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
^
Press the Further extras button 4
and select the Rinse hold option.
–
To start the final spin and end the
programme:
Each programme has a preset
optimum spin speed. You can alter
this spin speed if you wish.
^ Press the Start/Stop button to start
the final spin.
– To end the programme without the
final spin:
^ Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No spin)
^
Select No ..
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the anti-
crease stage. With some programmes
an additional rinse is introduced if this
setting is selected.
Spin
28
Programme rpm
Cottons 1400
Minimum iron 1200
Delicates 600
Woollens / 1200
Express 20 1400
Automatic plus 1200
Shirts 600
Maintenance prog. –
Spin 1400
Starch 1400
Denim 900
Dark garments 1200
Down filled items 1200
Outerwear 800
Proofing 1000
Separate rinse 1400