Filter
Top Products
An error message is displayed at the end of a program.
Issue Possible cause Solution
–
To turn off the fault message:
Open the drum door or press
and hold the "Pause/Hold to
Cancel" button until the fault
message goes out.
The "FAULT" indicator
"Drain" lights.
The drain is blocked. Clean the drain filter and the
drain pump.
The "FAULT" indicator
"Intake" lights.
The water intake is
blocked.
Possible fault:
Check if the water supply is
open all the way.
The "FAULT" indicator
"Over sudsing" lights.
The machine has
over sudsed.
Use less detergent in the next
wash program, and follow the
recommended amount on the
detergent packaging.
Frequently asked questions
31