Filter
Top Products
7. Start the program
^
Press the flashing "Start" button.
When pressing the "Start" button, do
not press and hold the button.
Only a brief tap is necessary.
The washer shows the current cycle of
the wash program under "STATUS".
The drum door will be locked when the
program starts.
The drum light turns off after the
program starts.
,
If a program was started without
detergent, cancel the program first.
Add detergent, then select and start
a program again.
8. Activate the Child Lock
(if desired)
The Child Lock prevents a program
from being canceled.
^ Press the "OPTIONS" button until the
"FAULT" indicator "Child Lock" lights.
Deactivate the Child Lock
^ Press the "OPTIONS" button until the
"FAULT" indicator "Child Lock" goes
out.
Once the program has finished, the
Child Lock must be deactivated.
Using the washer
21