Filter
Top Products
,
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^
Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
,
The washing machine must not
be moved without the transit bars in
place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g.when moving
house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
Installation and connection
47