Miele W2203 Washer User Manual


 
This washing machine has fully
electronic controls with automatic load
recognition. This machine takes in the
right amount of water required for the
programme depending on the amount
of laundry and its absorbency rate. This
means that programme cycles and
durations shown in the display can
vary.
The programme sequences outlined
below are based on the basic
programme with a full load. Additional
options which can be selected have not
been taken into account.
The programme sequence indicator
lights show the stage the programme
has reached.
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of the
Woollens
programme, the anti-crease action
switches on for a maximum of 30
minutes. The door can be opened and
laundry removed at any time during the
anti-crease phase.
1)
A third rinse takes place
automatically if:
there is too much foam in the drum
a spin speed of lower than 700 rpm
has been selected.
Without spin
has been selected
2)
Rinse and interim spin:
There is a spin between the rinses.
3)
A third rinse takes place
automatically if:
Without spin
has been selected
Omitting rinse and interim spin:
Select
Without spin
.
Garment care label symbols
29