Filter
Top Products
Installation site
,
Make sure the dryer door can be
opened without hindrance after
installation.
–
The dryer can be pushed under a
worktop if there is space to do this.
–
The appliance lid cannot be
removed.
To prevent problems or an
unnecessary increase in programme
duration:
,
The cool air intake panel at the
front of the dryer must not be
blocked or covered, e.g. by a
laundry basket.
,
The warm air which is expelled
from the rear of the dryer must be
able to dissipate.
Levelling the tumble dryer
The dryer must be perfectly level to
ensure safe and proper operation.
^
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,
Do not block the gap between
the bottom of the tumble dryer and
the floor with plinth facings, deep
pile carpet etc. This would hinder a
sufficient flow of air to the dryer.
Installation and connection
42