Miele T 7744 C Clothes Dryer User Manual


 
This tumble dryer conforms to
current safety requirements.
Inappropriate use can, however,
lead to personal injury and damage
to property.
To avoid the risk of accidents and
damage to the tumble dryer, please
read these instructions carefully
before using it for the first time. They
contain important information on its
safety, installation, use and
maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
Correct application
This tumble dryer is only intended
for drying fabrics which have been
washed in a water solution, and marked
on the manufacturer's care label as
being suitable for tumble drying.
"Dry cleaning kits" for freshening up
garments in a tumble dryer are
increasingly available on the market. If
using, do so at your own risk, and
follow the instructions provided on the
packaging.
Any other applications may be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation.
This tumble dryer is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience or knowledge, unless
they have been given supervision or
instruction concerning its use by a
person responsible for their safety.
Safety with children
Keep children away from the
tumble dryer at all times. It is not a
toy! To avoid the risk of injury do not
allow them to play on or near it or to
play with its controls. Supervise
children whilst you are using it.
Older children may only use it if its
operation has been clearly
explained to them, and they are able to
use it safely, recognising the dangers
of incorrect use.
Technical safety
Before setting up the tumble dryer,
check it for any externally visible
damage.
Do not install or use a damaged tumble
dryer.
Before connecting the tumble
dryer, ensure that the connection
data on the data plate (voltage and
connected load) match the mains
electricity supply. If in any doubt,
consult a qualified electrician.
Warning and Safety instructions
5