Filter
Top Products
Electrical connection
Electrical connection U.K.
All electrical work should be carried out
only by a suitably competent person, in
strict accordance with national and
local safety regulations.
The appliance is supplied with a mains
cable with moulded plug for connection
to a 230-240V mains supply. The volt-
age, rated load and fuse rating are given
on the data plate. Please ensure these
match the household mains supply.
Connection should be made via a fu-
sed plug and suitable switched socket
which is easily accessible after installa-
tion. For extra safety it is advisable to in-
stall a residual current device (RCD),
with a trip current of 30 mA. Do not con-
nect via an extension lead.
Important
The wires in the mains lead are colou-
red in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
Where it is necessary to change plugs,
if the colours of the wires in the mains
lead of this appliance do not corre-
spond with the coloured markings iden-
tifying the terminals of your plug,
proceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or co-
loured green, or green and yellow.
The wire which is coloured blue must
be connected to the terminal in the
plug which is marked with the letter N
or coloured black.
The wire which is coloured brown must
be connected to the terminal in the
plug which is marked with the letter L
or coloured red.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Ensure power is not restored to the
appliance while installation work is
being carried out.
Non-rewireable plugs BS 1363
If this machine is fitted with a non-rewi-
reable plug, the following information
applies:
If the socket outlets are not suitable for
the plug supplied with the product, it
must be cut off and an appropriate
plug fitted.
The plug cut from the flexible cord should
be disposed of and on no account be in-
serted into any socket elsewhere in the
house (electric shock hazard).
The fuse cover must be refitted when
changing the fuse, and if the fuse cover is
lost, the plug must not be used until a sui-
table replacement is obtained. The colour
of the correct replacement cover is that of
the coloured insert in the base of the plug,
or the colour that is embossed in words on
the base of the plug (as applicable to the
design of plug fitted).
Replacement fuses should be ASTA ap-
proved to BS 1362 and have the cor-
rect rating. Replacement fuse covers
may be purchased from your local
electrical supplier or Service agent.
Electrical connection
34