Filter
Top Products
"Clean out airways" indicator light
This indicator light shows that the dryer
is not working most efficiently or econo-
mically.
The causes of this check message can
be:
– the fluff filters in the door and the se-
condary filters in the door opening
are blocked;
– the condenser unit is blocked.
The "Clean out airways" check light will
only go out before the start of a pro-
gramme if the dryer has been switched
off with the "l-On/0-Off" button.
After drying
When the drying programme has finis-
hed the “Anti-crease / finish” sequence
indicator light comes on.
Press the “Door” button to open the
door.
Remove the laundry.
Make sure that the drum is empty.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is next used.
After every cycle remove the fluff
from
– the fluff filter in the door
– the filters in the door opening
(See the section on “Cleaning and
care”).
Empty the condensed water contai-
ner (where there is no external
drainage of the water). See the secti-
on on “Cleaning and care”.
Close the door and switch off the
machine after each use.
Press the “l-On / 0-Off” button to
switch off.
How to dry correctly
14