Filter
Top Products
Programmes
–
Standard drying programmes for
Cotton and Miniumum iron fabrics
–
Automatic, Shirts, Denim, Woollens
hand care, Smoothing
special
programmes
–
Timed drying programmes
Display
The following are shown in the display:
–
the programme duration (time
remaining);
– the delay start time;
– the programmable functions.
Estimated time remaining
When a programme is selected the
estimated drying time will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this the
time displayed can alter during the
course of a programme.
In the same way, the
Woollens hand
care
and
Smoothing
programmes can
finish earlier than expected if a certain
temperature is reached. This can
happen with particularly fine fabrics or
if items were partly dry beforehand.
PC / Optical interface
The indicator light marked PC can used
by Miele Service technicians as an
optical interface to update your
machine in future years.
Electronic system lock
–
Prevents the machine being used
without your knowledge.
Programmable functions
–
For changing the standard settings.
Drum lighting
If the dryer is switched on, the drum
lighting will come on when the door is
opened. It will go out after a short while
if the door is left open to save energy.
Guide to the appliance
10