Filter
Top Products
F Remove the laundry
^
Press the
Door
button.
^
Open the door.
^
Remove the laundry.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^
Switch the dryer off by pressing the
l-On/0-Off
button.
^
Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (where there is no external
drainage of the water).
^ The condenser unit should be
checked and cleaned on a regular
basis.
Changing the programme
sequence
Changing a programme while it is
running
As long as the cooling down phase or
the anti-crease phase has not been
reached, it is possible to change a
programme after it has started by
turning the programme selector to a
different programme position.
To interrupt a programme
^
Switch the machine off with the
I-On/0-Off
button.
To continue drying:
^
Switch the dryer on with the
I-On/0-Off
button.
The programme will continue (only with
the
Cottons, Minimum iron and Auto
-
matic
programmes).
Other programmes:
^
Press the
Start
button.
To cancel a programme
^
Turn the programme selector to
Finish
or open the door.
Adding or removing laundry after a
programme has started
^ Press the
Door
button.
^ Open the door.
,Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^
Add or remove items.
^
Close the door.
^
Press the
Start
button.
How to dry correctly
13