Filter
Top Products
Selecting a different programme
As long as the cooling down phase or
the anti-crease phase has not been
reached it is possible to change a
programme after it has started by
turning the programme selector to a
different programme position.
Interrupting a programme
^
Switch the machine off with the
I-On / 0-Off
button.
To continue drying:
^
Switch the dryer on with the
I-On / 0-Off
button.
With COTTONS and MINIMUM IRON
programmes the programme will
continue unless the cooling down or
anti-crease phase has been reached.
With other programmes:
^ Press the
Start
button.
Adding or removing items
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^
Open the door. Take out or add items
as required.
^
To continue drying close the door
and press
Start
.
To cancel a programme
^
Turn the programme selector to
Finish
or open the door .
The programme has been successfully
cancelled when only the
Anti-crease/Finish
indicator lamp is on.
E At the end of a programme
At the end of a programme the
Anti-crease/Finish
lamp will come on in
the sequence display and the buzzer
will sound.
The drum will continue to rotate at
intervals to prevent laundry creasing, if
you do not wish to remove it immediate
-
ly. This anti-crease phase lasts for a
maximum of 60 minutes, except with
the
Woollens hand care
programme.
^ Press the
Door
button and open the
door.
^ Remove the laundry.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^
Clean the filter.
^
Close the door.
^
Switch the dryer on by pressing the
l-On/0-Off
.
How to dry correctly
15