Filter
Top Products
Buzzer
An audible tone sounds repeatedly at
the end of a programme.
The buzzer is activated as standard
ex-works. It can be deactivated if
wished.
The buzzer will sound if there is a fault,
even if it has been deactivated.
Follow steps A to G to programme and
store in memory.
The programmable functions are
activated with the help of the
Start
button and the programme selector.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish
.
A Press the
Start
button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the dryer on with the
I-On / 0-Off
button.
C Wait until the
Start
indicator lamp
comes on . . .
D . . . and then release the
Start
button.
E Turn the programme selector to the
COTTONS
Hand iron
position.
–
If the
Drying
lamp is flashing, the
buzzer is activated.
–
If the
Drying
lamp is not on, the
buzzer is deactivated.
F Pressing the Start button switches
between activating and deactivating
the buzzer.
G Switch the machine off with the
I-On / 0-Off
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^ Carry out steps A to E.
If the indicator lamp for
Drying
flashes = The Buzzer
is activated
is not on = The Buzzer
is deactivated
^
Switch off the dryer.
The check is complete.
Programmable functions
42