Filter
Top Products
Memory function
The additional options selected
previously for specific programmes
are stored in the machine’s memory.
The machine is supplied ex-works with
the memory function switched off. It can
be activated is wished.
Programming and storing in memory
The programmable functions are
activated with the help of the additional
option buttons and the programme
selector.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish
.
A Press the
Low temperature
and
Buzzer
buttons at the same time,
keep them pressed in
and ...
B ... switch the dryer on with the
I-On /
0-Off
button.
C Then release these buttons.
–
The
Drying
and
Cool air
sequence
indicator lamps will flash.
D Turn the programme selector to
COTTONS
Normal
.
–
If the
Machine iron
sequence
indicator does not light up, the
Memory function is deactivated.
–
If the
Machine iron
sequence
indicator does light up, the Memory
function is activated.
E Pressing the START button switches
between activating and deactivating
the Memory function.
F Switch the machine off with the
I-On /
0-Off
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^ Carry out steps A to D.
If the indicator light for
Machine iron
lights up = the Memory function is
switched on
does not light up = the Memory
function is switched off
^
Switch the machine off with the
I-On /
0-Off
button.
The check is complete.
Programmable functions
45