Filter
Top Products
The system lock prevents anyone
from interfering with the dryer.
If the system lock has been activated it
is not possible to start a programme.
The following steps (A,B,C...) must
be carried out in the correct order.
To activate the system lock
A Ensure that the door is closed and
that the programme selector is
turned to
Finish
.
B Switch the machine on.
C Press the
Short
button and keep it
pressed in whilst carrying out steps
D to F.
D Slowly turn the programme selector
clockwise
step by step until it
reaches the COTTONS
Normal
position.
E Slowly turn the programme selector
anti-clockwise
step by step to
Finish
.
F Slowly turn the programme selector
anti-clockwise
step by step to the
MINIMUM IRON
Hand iron
position.
The
Locked
indicator lamp will flash.
G Then release the
Short
button.
The system lock is now activated.
H Switch the machine off with the
I-On /
0-Off
button.
To deactivate the system lock
^
Repeat steps A-G.
The
Locked
indicator lamp will go out
after step F.
Electronic system lock
19