Filter
Top Products
External water drain
When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose
at the back of the dryer.
The condensed water can be drained
directly into a drain if the machine is
installed near a sink or standpipe so
that the condensed water container
does not have to be emptied.
Drain hose length:. . . approx. 3 ft. (1 m)
Extension hose (accessory). . 6 ft. (2 m)
Maximum Drain height: . . 4’ 11" (1.5 m)
Maximum Drain length . . . . . 13 ft. (4 m)
,
Under special installation
circumstances this dryer must be
fitted with a non-return valve
(accessory), see "Special
Installation".
Max. drain height
with non-return valve: . . . . 3' 3" ft. (1 m)
Installing the drain hose
Do not pull or kink the drain hose,
this could cause damage!
^ Unclip the drain hose from the
clamps 1 and 2, and pull it off the
holder, 3.
^
The lower clamps, 4, can be opened
to install the drain hose or to feed the
power cable through.
Installation
35