Filter
Top Products
Cleaning the lint filter
The lint filter must be cleaned after
every program.
^ Open the door and remove the lint
filter by gently lifting it upwards.
^
Wipe the lint off the filter with your
hand (do not use any sharp objects!)
^ Remove the lint from the door frame
lint filter with your fingers.
^ Any lint remaining in the hollow
casing of the door can be removed
through the gap at the bottom with a
dust brush or vacuum.
^ Return the lint filter and close the
door.
The lint filters (once removed from
the dryer) can be rinsed with hot
water if necessary. The filters must
be dried thoroughly before being
returned to the dryer.
^
Take the door lint filters out by turning
the knob at the filter top.
Dryer care
14