Filter
Top Products
Anti-crease
Anti-crease helps prevent creasing, if
laundry is not normally removed
immediately after the end of a
programme.
The anti-crease function
–
is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
–
is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
twice.
–
The Low temperature indicator light
will flash 3 times briefly.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Anti-crease off
1 1 hour anti-crease
(the Automatic indicator light will also
flash once).
2 2 hours anti-crease
(factory default setting)
(the Automatic indicator light will also
flash twice).
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^
Switch the dryer off after step D.
Programmable functions
52