Filter
Top Products
Installation
The machine should be level to ensure
safe and proper operation. Minor dis-
crepancies do not, however, have an
adverse effect on operation.
The machine can be leveled by turn-
ing the legs clockwise or counter-
clockwise as necessary.
Turn the counternuts up and tighten
against the bottom.
A gap of 10 mm must be main-
tained between the bottom of ma-
chine and the floor. This gap must
not be blocked by deep pile carpet,
plinths etc., as this will prevent a suf-
ficient intake of cold air.
Where to install the machine
The space required by the vent
duct should be taken into consider-
ation when calculating the distance
between the machine and a wall or
other appliances.
The tumble dryer can also be placed
on top of a Miele washing machine (ca-
pacity 6 kg) for a stacked installation.
An appropriate stacking kit is required
and can be obtained from your Miele
dealer, or the Miele Parts Dept.
INSTALLATION INSTRUCTIONS
20