Filter
Top Products
To select a program
Press the "On/Off" button.
Set the desired program by turning
the program selector either clock-
wise or counterclockwise.
Press the "Start" button.
The program status will be stored for
30 minutes in the event of a power
failure.
The program is canceled if:
– There is a power failure lasting more
than 30 minutes.
– The door is opened after the ma-
chine has entered the "Cooling
down" or "Anti-crease" stage.
To change a program during
drying
Set the program selector to the
desired program.
The new program will start from the be-
ginning.
The tables on the following pages list
the range of applications for the differ-
ent programs.
Correct procedure
1
Press the "On/Off" button.
2 Press the "Door" button.
3 Open the door and load the machine.
4 Close the door with a firm swing - do
not push it shut.
5 If drying delicate fabrics, press the
"Low temp." button.
6 Select the "Buzzer" if so desired.
7 Select a program.
8 Press the "Start" button.
After the program has finished
1
Set the program selector to "Finish".
2 Remove the laundry.
3 Clean the lint filter.
4 Turn off the machine.
Program selection
11