Filter
Top Products
What if,...? Possible fault Fix
. . . the "anti-crease"
indicator lamp in the
sequence indicator
display starts flashing?
–
Turn the program
selector to "finish".
–
Turn the machine off
and then on again.
–
Select a program..
–
Press the "Start" button.
If the indicator lamp starts
flashing again, this
indicates a fault in the
machine.
Please contact the Miele
Service Dept.
. . . the drum door opens
during the drying cycle?
The machine has
overheated. The
temperature limiter
opened the drum door
and caused the machine
to turn off automatically.
Possible reasons for
overheating:
– The lint filter in the door
is clogged.
–
The vent duct is
blocked.
–
The vent aperture (e.g.
louvred window vent,
wall vent) is blocked.
Before restarting the
program, proceed as
follows:
– Release the ON/OFF
button.
– Clean the affected part
of the machine.
– Turn on the machine
again.
–
Reselect the
terminated program.
–
Press the “Start”
button.
If the drum door opens
again, the Miele Service
Dept. should be
contacted.
Frequently asked questions
18