Miele 2819i Washer User Manual


 
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^ Using the spanner supplied turn
counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
^
Use a spirit level to check the
machine is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
,
All four counternuts must sit
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Washer-dryer stack
A Miele tumble dryer can be stacked
on top of this washing machine. To do
this the appropriate "WTV" stacking kit
(available to order) to match your
washing machine is required.
,
The stacking kit must be fitted by
suitably qualified fitter.
Installation and connection
55