Filter
Top Products
Problem solving guide
65
The following fault messages appear in the display at the end of
the programme
Problem Cause and remedy
Align the washing
machine
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
Check whether the washing machine is aligned
correctly as described in "Installation and connec‐
tion - Levelling the machine".
Check whether the maximum delivery height of
1 m has been exceeded.
If the fault message appears again, contact the Serv‐
ice Department. The washing machine can still be
used but with reduced functionality.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.