Filter
Top Products
Top-up rinse for Cottons
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Top-up rinse takes place when a
temperature of 95°C is selected.
Top-up rinse should be activated:
–
to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for Cottons
deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The machine is properly closed.
–
The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start button indicator
light comes on . . .
D . . . and then release the Start
button.
E Turn the programme selector to the
Cottons 30°C position:
A P will flash in the display alternating
with the number 0 or 1.
0 = Top-up rinse is deactivated.
1 = Top-up rinse is activated.
F Press the Start button to change the
display from 0 to 1 or from 1 to 0.
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
59